+- BraveRO Forums (https://brave-ro.com/forum)
+-- Forum: BraveRO (https://brave-ro.com/forum/forumdisplay.php?fid=1)
+--- Forum:
Technical Difficulties (https://brave-ro.com/forum/forumdisplay.php?fid=5)+--- Thread: [Errors Guide] How to fix almost all BraveRO errors (/showthread.php?tid=39)
[Errors Guide] How to fix almost all BraveRO errors - Myune - 05-12-2022
1. [MSVCP100.dll was not found] and [mfc100.dll was not found]
To fix this error, please download and install both of these files:
32Bit: Microsoft Visual C++ 2010 SP1 Redistributable Package (x86)
64Bit: Microsoft Visual C++ 2010 SP1 Redistributable Package (x86)
https://www.microsoft.com/en-us/download/details.aspx?id=26999
Note:
Gepard might move some of those files to the 'trash' folder in your installation folder. Simply all files from the 'trash' folder to your installation folder and run patcher before starting the game.
or
Restart and do a fresh clean install of DreamerRO after you installed both of these above applications.
2. Screenshots are greyish and stretched
It is most likely your resolution isn't configured. Use Setup.exe (found in your installation folder) and change to the resolution combinations that fit your system. Common resolution combinations to those are 640x480, 1024x768, 1280x1024, 1920x1080.
3. Alt+M hotkeys doesn't save
Simply right-click your client (BraveRO Patcher or BraveRO.exe) and select the option 'Run as administrator'. Your game would start normally, edit the hotkeys again and it should stay when you re-logged.
4. Error every time I opened BraveRO
It could be you are missing the core files to get BraveRO running. It is most likely antivirus/firewall blocking and deleting your files during installation. Temporarily disable your antivirus/firewall and install it into a new folder. Make sure to open BraveRO Patcher first after the installation to receive all necessary updates required for the client to run without any issue. Please note that you might have to run BraveRO Patcher and BraveRO.exe as administrator for it to run properly. You may set it to always run as administrator by right-clicking these files and selecting Properties > Compatibility tab > Run this program as an administrator.
5. Tiny/small window
Try the following,
a. Change resolution by running Setup.exe in your installation folder and make sure to run it as administrator.
b. Change the compatibility of your BraveRO to the older windows version (window XP). Right-click BraveRO.exe > Properties > Compatibility tab > Run this program in compatibility mode for..
6. Can't change resolution
Please run Setup.exe as administrator.
More errors and solutions are to be added to the list as we go.
Please do not hesitate to open a topic in Technical Difficulties if the solutions above did not fix your issue.